Find here PTFE Coatings manufacturers, PTFE Coatings suppliers, PTFE Coatings wholesalers, PTFE Coatings traders, PTFE producers, PTFE Coatings exporters, PTFE Coatings production centers, PTFE Coatings companies for your sourcing needs
2014年2月27日星期四
Fitch Rates Port Huron MI's $5.5MM LTGOs
Fitch Rates Port Huron, MI's $5.5MM LTGOs 'A'.Business Editors NEW YORK--(BUSINESS WIRE)--Oct. 21, 2003 Fitch RatingsFitch RatingsAn international rating agency for financial institutions, insurance companies, and corporate, sovereign, and municipal debt. Fitch Ratings has headquarters in New York and London and is wholly owned by FIMALAC of Paris. assigns an 'A' rating to Port HuronPort Huron (hyr`ən), city (1990 pop. 33,694), seat of St. Clair co., S Mich., a natural, deepwater port of entry at the junction of the St. Clair River with Lake Huron; inc. 1857. , Michigan's $5.5 million general obligation limited tax bonds, series 2003, scheduled for competitive sale on Oct. 27, 2003. The Rating Outlook is Positive. Dated Nov. 1, the bonds mature serially April 1, 2004 - 2023, with semiannual interest payments commencing April 1, 2004. Bonds maturing on or after Oct. 1, 2012 are subject to optional redemption beginning April 1, 2013. Proceeds of this issue will finance Teflon Coatings improvements to the city's sanitary and storm drainstorm drainn.1. A storm sewer.2. A catch basin. systems. The bonds are limited tax general obligations of the city and constitute a first budget obligation. However, the city intends to make debt service payments from the net revenues of its wastewater system. Fitch Ratings also affirms the 'A' rating on the city's $61.7 million in outstanding limited tax general obligation debt. The rating reflects the city's growing economic base, steady financial performance during a period of fiscal stress, and low direct debt levels. The positive outlook reflects the city's recent infrastructure improvements and continued mixed-use developmentMixed-use development refers to the practice of allowing more than one type of use in a building or set of buildings. In planning zone terms, this can mean some combination of residential, commercial, industrial, office, institutional, or other land uses. of its waterfront property that should generate further economic growth; the city's prudent management, which anticipated budgetary pressures and responded in a timely manner with constrained spending, allowing the city to achieve operating surplusesOperating surplus is an accounting concept used in national accounts statistics (such as United Nations System of National Accounts (UNSNA) and in corporate and government accounts. It is also used in macro-economics as a proxy for total pre-tax profit income. in the last three fiscal years (June 30 year-end); and the city's use of internal resources for capital improvements which limits its external financingIn the theory of capital structure, External financing Ceramic Powder Coatingis the phrase used to describe funds that firms obtain from outside of the firm. It is contrasted to internal financing which consists mainly of profits retained by the firm for investment. needs and sustains its low direct debt levels. Located on the western shore of Lake Huron 60 miles northeast of Detroit, Port Huron's 2000 census population equaled 32,338, a level relatively unchanged since 1990. The city's improved growth is reflected in the property tax base, which recorded a 6.3% annual increase in taxable values between 1999 and 2003. The city's property tax base is somewhat diversified, as the top ten taxpayers constitute 16.4% of the total taxable value. The city anticipates further expansion of its tax base over the next few years as tax increment financingTax Increment Financing, or TIF, is a tool which has been used for redevelopment and community improvement projects throughout the United States for more than half a century. districts return to the tax roles. The city's strong financial management sustained the city's steady financial performance, overcoming declines in income tax receipts and state shared revenue resulting from a slowed economy. General fund revenues remained level since 1999 at $20.8 million, as increases in property tax receipts were offset by declines in income tax, state shared revenue, and investment income. While expenditures grew slightly during this period, particularly in public safety, management's cost constraints sustained balanced operations. As a result, the city's general fund balance increased to 13.3% of expenditures in fiscal 2002 from 9.9% in 1998. Fitch expects the city will again report balanced operations for fiscal 2003. Port Huron is in its sixth year of a 15-year, $110 million project to separate its sanitary and storm sewersstorm sewern.A sewer for carrying off rainwater or meltwater, as to a river or bay. . As the city utilizes water and wastewater system revenues to repay the debt related to the program, the city's outstanding debt places little burden on the property tax base. Port Huron's minimal capital needs and use of internal resources to finance ongoing road improvements should sustain this low debt burden. A critical source of these internal fundsinternal fundsFunds that are raised within a firm. Wear Resistant Coatings For example, income after taxes and noncash expenses, such as depreciation, provide a firm with funds to use in the acquisition of investments. is a dedicated 2-mill property tax levy that expires in 2004, when management plans to seek reauthorization. The city's overall debt levels are low at $589 per capita[Latin, By the heads or polls.] A term used in the Descent and Distribution of the estate of one who dies without a will. It means to share and share alike according to the number of individuals. and 1.2% of full value.COPYRIGHT 2003 Business WireNo portion of this article can be reproduced without the express written permission from the copyright holder.Copyright 2003, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.
2014年2月16日星期日
Ways to Green Your Kitchen
See More Abouteco-friendlylearning to cookcooking tipsThe cooking equipment you invest in, and how you use it, can go a long way in helping you conserve water, energy and other resources, cut down on toxins, reduce waste, and generally be more environmentally responsible. Use these tips to cook in a more sustainable way, with less impact on the environment.
Keep your fridge and freezer full. Having more food in your refrigerator and freezer can actually help it run more efficiently by helping it to Teflon Coatings maintain the proper temperature. If you truly can't keep the refrigerator full, fill empty space with bottles of water to help keep it cold. The appliance will use less electricity, which is always good for the environment, and you'll even shave a few dollars off your monthly bill!Compost food scraps. Start a compost pile in a corner of your backyard for food scraps, and use a kitchen composter to collect the scraps until you can take a load out to your pile. Putting food in the garbage contributes to the release of methane gas in landfills, which is a damaging greenhouse gas. By composting your food, you'll be diverting it from the landfill and turning it into a rich, nutrient-filled substance that you can add to the soil in your garden. As a bonus point, the compost you create for your garden is better for the environment than chemical fertilizers and other artificial soil additives. If you don't compost, the next best green alternative for disposing of food scraps is in the disposal, as many water treatment plants are able to turn the slurry of food scraps into biogas that is then used as a form of power.Shorten preheating time. Certain foods, such as baked potatoes, casseroles, and roasted vegetables don't require an oven to be fully preheated before you put them in. You can get a head start on cooking, and not waste the energy that's being used to preheat an empty oven, by putting them into the oven right when you turn it on. Also, for more forgiving recipes, you can turn the oven off a few minutes before it's finished cooking; the oven will retain heat for quite some time. Shortening the amount of time that you oven is actually turned on will help save energy.Use earth-friendly nonstick. Non Stick Coating Safety Traditional nonstick-coated cookware is made using chemicals, including PFOA, a known toxin that is used in the production of the coatings. Although PFOA only remains in trace amounts in the finished product, it has been found to persist in the environment and in the bloodstreams of much of the US population, which is concerning since the chemical has been found to cause developmental effects in laboratory animals. While the EPA has been working with chemical companies to reduce, and eventually eliminate, the use of PFOA, you can also find nonstick surfaces that are made with much safer materials. Bialetti Aeternum, for instance, is a ceramic coating, and Swiss Diamond, as the name suggests, uses a coating derived from powdered diamonds.Use your dishwasher- and fill it up. Environmentalists have long debated whether washing dishes by hand or in a dishwasher has a lower impact. And according to a recent study, it turns out that using a dishwasher uses less water and energy (not to mention time!). To be even more sustainable, be sure to run the dishwasher only when it’s filled to capacity, and turn off the heat dryer setting (or, if you can’t control this on your machine, wait for the rinse cycle to finish and then turn off and open the dishwasher so that dishes will air dry.Use reusable containers for leftovers and packed meals and snacks. Cut down on waste by eliminating the use of plastic wraps and bags, and aluminum foil. Instead, stock up on reusable containers (look for glass or BPA-free plastic) to store leftovers or to pack lunches and snacks.Buy recycled (and recyclable) utensils and other gear. (Check out these eco-friendly kitchen products) There is a wide variety of sustainably made kitchenware on the market today, from bamboo fiber dishtowels to cutting boards made from recycled paper to mixing bowls made from recycled plastic. Next time you’re on the market for a kitchen item, look for something made from sustainable or recyclable materials. You can also seek out Ceramic Coatings companies that you know have a green message, such as using a minimum of packaging, donating money to environmental or social causes, or using wind power or other green energy sources. By supporting such products and brands, you can feel good about your purchase knowing that it’s been created with the environment in mind.Eco-friendly productsReview: Original Spaghetti ScrubReview: Epicurean Cutting BoardsReview: Misto Olive Oil SprayerGreen QuestionsHow do I dispose of used cooking oil?What is PFOA?Are Wooden Spoons Sanitary?Related ArticlesTips to Green the Kitchen VideoCooking Safety - Kitchen SafetyKitchen Makeover - Simple Ways to do a Kitchen MakeoverTop Tips to Save Energy in the KitchenEnergy Saving Tips for Home: Easy and Inexpensive
Keep your fridge and freezer full. Having more food in your refrigerator and freezer can actually help it run more efficiently by helping it to Teflon Coatings maintain the proper temperature. If you truly can't keep the refrigerator full, fill empty space with bottles of water to help keep it cold. The appliance will use less electricity, which is always good for the environment, and you'll even shave a few dollars off your monthly bill!Compost food scraps. Start a compost pile in a corner of your backyard for food scraps, and use a kitchen composter to collect the scraps until you can take a load out to your pile. Putting food in the garbage contributes to the release of methane gas in landfills, which is a damaging greenhouse gas. By composting your food, you'll be diverting it from the landfill and turning it into a rich, nutrient-filled substance that you can add to the soil in your garden. As a bonus point, the compost you create for your garden is better for the environment than chemical fertilizers and other artificial soil additives. If you don't compost, the next best green alternative for disposing of food scraps is in the disposal, as many water treatment plants are able to turn the slurry of food scraps into biogas that is then used as a form of power.Shorten preheating time. Certain foods, such as baked potatoes, casseroles, and roasted vegetables don't require an oven to be fully preheated before you put them in. You can get a head start on cooking, and not waste the energy that's being used to preheat an empty oven, by putting them into the oven right when you turn it on. Also, for more forgiving recipes, you can turn the oven off a few minutes before it's finished cooking; the oven will retain heat for quite some time. Shortening the amount of time that you oven is actually turned on will help save energy.Use earth-friendly nonstick. Non Stick Coating Safety Traditional nonstick-coated cookware is made using chemicals, including PFOA, a known toxin that is used in the production of the coatings. Although PFOA only remains in trace amounts in the finished product, it has been found to persist in the environment and in the bloodstreams of much of the US population, which is concerning since the chemical has been found to cause developmental effects in laboratory animals. While the EPA has been working with chemical companies to reduce, and eventually eliminate, the use of PFOA, you can also find nonstick surfaces that are made with much safer materials. Bialetti Aeternum, for instance, is a ceramic coating, and Swiss Diamond, as the name suggests, uses a coating derived from powdered diamonds.Use your dishwasher- and fill it up. Environmentalists have long debated whether washing dishes by hand or in a dishwasher has a lower impact. And according to a recent study, it turns out that using a dishwasher uses less water and energy (not to mention time!). To be even more sustainable, be sure to run the dishwasher only when it’s filled to capacity, and turn off the heat dryer setting (or, if you can’t control this on your machine, wait for the rinse cycle to finish and then turn off and open the dishwasher so that dishes will air dry.Use reusable containers for leftovers and packed meals and snacks. Cut down on waste by eliminating the use of plastic wraps and bags, and aluminum foil. Instead, stock up on reusable containers (look for glass or BPA-free plastic) to store leftovers or to pack lunches and snacks.Buy recycled (and recyclable) utensils and other gear. (Check out these eco-friendly kitchen products) There is a wide variety of sustainably made kitchenware on the market today, from bamboo fiber dishtowels to cutting boards made from recycled paper to mixing bowls made from recycled plastic. Next time you’re on the market for a kitchen item, look for something made from sustainable or recyclable materials. You can also seek out Ceramic Coatings companies that you know have a green message, such as using a minimum of packaging, donating money to environmental or social causes, or using wind power or other green energy sources. By supporting such products and brands, you can feel good about your purchase knowing that it’s been created with the environment in mind.Eco-friendly productsReview: Original Spaghetti ScrubReview: Epicurean Cutting BoardsReview: Misto Olive Oil SprayerGreen QuestionsHow do I dispose of used cooking oil?What is PFOA?Are Wooden Spoons Sanitary?Related ArticlesTips to Green the Kitchen VideoCooking Safety - Kitchen SafetyKitchen Makeover - Simple Ways to do a Kitchen MakeoverTop Tips to Save Energy in the KitchenEnergy Saving Tips for Home: Easy and Inexpensive
Useful household tip Green Pans
January 19, 2009
The New York Collection of Green PansI was watching "Stuff Happens" on Planet Green the other day and Bill Nye the Science Guy told me that I should stop using my mangled old non-stick pans, or I just might die. Since Bill Nye was often used in my science classes in school I figure he can be trusted and so I tossed my old pans in the recycling bin, took my Target gift cards from Christmas and headed to the store to buy a Green Pan.Teflon Coatings
Here's the long and short of it. Non-stick Teflon pans have polytetrafluoroethylene, or PTFE for short, in them. The stuff that peels off when you use metal spatulas on them, or other wash too hard is full of PTFE which, at least according to Bill Nye, has proven to be a carcinogen to mice.
DuPont, the owner of the Teflon trademark, understandably claims that no harm can come from using PTFE-coated pans or utensils. And the U.S. Environmental Protection Agency (EPA) agrees.
But not everyone agrees! They also say there is no difference in dairy products from cows treated with hormones, but I don't buy that either.
"Some skeptics and consumer watchdogs, however, fret about the chemicals involved in making PTFE, most of which are extremely toxic. In fact, some of the chemicals are so toxic that workers at DuPont developed polymer fume fever with flu-like symptoms when exposed to PTFE manufacturing chemicals, particularly perfluorooctanoic acid (PFOA)."
You can believe who you want, but my general feeling is this: I see no reason to put more chemicals into my body than necessary. Soon, in won't matter, because DuPont and other makers of non-stick goods have pledged to stop using PTFE over the next few years. Until then you have a few choices: cast iron pans, Heat Resistant Coating ceramics, or Green Pans. I have a GIANT cast iron pan that I bought for camping. It's very heavy, and a bit more maintenance than your average pan -- and since it isn't seasoned quite properly yet, it's not really "non-stick." I didn't feel like I knew enough about ceramic pans to buy one and know it's not toxic, so I went for the easy choice, the Green Pan.
Green Pans use a technology called Thermolon -- almost as creepy sounding as Teflon -- but in their words:
"We at GreenPan™ have taken this to heart and turned our attention to the environmental and health issues surrounding our products. In contrast to the classical PTFE-based non-stick technology (using PFOA as a processing agent), Thermolon™-coated cookware releases 50% fewer greenhouse gases during production and contains NO toxic substances that could be released at high temperatures. GreenPan™ brings you the latest development in non-stick cookware, a completely PTFE-free product. Thermolon™, a non-stick-coatings on high quality cookware."
The pans are a little pricy but if you're going out to buy a decent set of pans, it's worth to money to not have to worry about what you're ingesting.
For more info:
Nonstick Cookware Safety: Are There Alternatives to Teflon?
The New York Collection of Green PansI was watching "Stuff Happens" on Planet Green the other day and Bill Nye the Science Guy told me that I should stop using my mangled old non-stick pans, or I just might die. Since Bill Nye was often used in my science classes in school I figure he can be trusted and so I tossed my old pans in the recycling bin, took my Target gift cards from Christmas and headed to the store to buy a Green Pan.Teflon Coatings
Here's the long and short of it. Non-stick Teflon pans have polytetrafluoroethylene, or PTFE for short, in them. The stuff that peels off when you use metal spatulas on them, or other wash too hard is full of PTFE which, at least according to Bill Nye, has proven to be a carcinogen to mice.
DuPont, the owner of the Teflon trademark, understandably claims that no harm can come from using PTFE-coated pans or utensils. And the U.S. Environmental Protection Agency (EPA) agrees.
But not everyone agrees! They also say there is no difference in dairy products from cows treated with hormones, but I don't buy that either.
"Some skeptics and consumer watchdogs, however, fret about the chemicals involved in making PTFE, most of which are extremely toxic. In fact, some of the chemicals are so toxic that workers at DuPont developed polymer fume fever with flu-like symptoms when exposed to PTFE manufacturing chemicals, particularly perfluorooctanoic acid (PFOA)."
You can believe who you want, but my general feeling is this: I see no reason to put more chemicals into my body than necessary. Soon, in won't matter, because DuPont and other makers of non-stick goods have pledged to stop using PTFE over the next few years. Until then you have a few choices: cast iron pans, Heat Resistant Coating ceramics, or Green Pans. I have a GIANT cast iron pan that I bought for camping. It's very heavy, and a bit more maintenance than your average pan -- and since it isn't seasoned quite properly yet, it's not really "non-stick." I didn't feel like I knew enough about ceramic pans to buy one and know it's not toxic, so I went for the easy choice, the Green Pan.
Green Pans use a technology called Thermolon -- almost as creepy sounding as Teflon -- but in their words:
"We at GreenPan™ have taken this to heart and turned our attention to the environmental and health issues surrounding our products. In contrast to the classical PTFE-based non-stick technology (using PFOA as a processing agent), Thermolon™-coated cookware releases 50% fewer greenhouse gases during production and contains NO toxic substances that could be released at high temperatures. GreenPan™ brings you the latest development in non-stick cookware, a completely PTFE-free product. Thermolon™, a non-stick-coatings on high quality cookware."
The pans are a little pricy but if you're going out to buy a decent set of pans, it's worth to money to not have to worry about what you're ingesting.
For more info:
Nonstick Cookware Safety: Are There Alternatives to Teflon?
Tips for Spraying on Wood Finishes
My first shop was a one-car garage. What space I had was filled with tools that were absolutely necessary to make furniture. That left out a dust collector and a finishing room. As a result, getting dust-free finishes was frustrating. Brushing on shellac and varnish worked fine for small projects, Ceramic Coating but as I took on bigger jobs and built more pieces, I turned to wipe-on oils because they weren't as fussy to use. Eventually, I needed more durable finishes that didn't take long to apply.
A spray system was the answer. Spraying on finish is fast and easy. You can get into places where brushes and rags are useless. Spray finishes look superb, too. The coating is more uniform and the finish between pieces is more consistent. But once I was committed to changing to spray finishes, I knew I had some research to do.
Spray Systems and Finishes are Better Now
The variety of spray systems has increased dramatically over the years. Manufacturers have introduced small, inexpensive units that are ideal for hobbyists and small shops. Also, there have been many improvements in high-volume, low-pressure spray systems, particularly in terms of transfer efficiency.
Brush-On and Wipe-On Finishes are Slow and Exacting
In mu furniture business, I brushed on varnishes for only a short time. Varnish was just too slow to brush and too slow to dry. And I needed excellent lighting to brush, sand, and rub out the varnish. I did stick with wipe-on oils for a while. Oil didn't require any special equipment, Best Non Stick Coating and I could oil in less-than-ideal conditions. I wasn't building up a thick surface film, so I worried less about dust and lint getting trapped in the film.
Any Spraying Disadvantage Can Be Overcome
As attractive as spray finishing is, it does have a few weaknesses. Setting up a safe, efficient system takes up shop space and costs money. Besides a gun, you will need a source of air, hoses, filters, and connectors. Because spraying releases finish mist into the air, you will also need a spray area that has fresh-air circulation. If you spray solvent-based finishes, you'll need to check with your local building inspector before you set up a booth. But if you spray water-based products exclusively, you won't need explosion-proof fans and fixtures.
Finally, keeping your spray gun clean is critical. Although cleaning does involve some effort and time, it doesn't take any longer to clean a spray gun than it does a brush.
Ultimately, Spraying Reduces Finishing Costs
Although some of the finish does get wasted through overspray, you can still lower your material costs. I've had to reject far fewer pieces that I've sprayed than those that were finished by brush or rag. Water Based Coatings And spraying saves labor costs. In the first month, I more than offset the initial expense of the equipment. Now my business couldn't survive without a spray system.
Published byArthur Piper
A spray system was the answer. Spraying on finish is fast and easy. You can get into places where brushes and rags are useless. Spray finishes look superb, too. The coating is more uniform and the finish between pieces is more consistent. But once I was committed to changing to spray finishes, I knew I had some research to do.
Spray Systems and Finishes are Better Now
The variety of spray systems has increased dramatically over the years. Manufacturers have introduced small, inexpensive units that are ideal for hobbyists and small shops. Also, there have been many improvements in high-volume, low-pressure spray systems, particularly in terms of transfer efficiency.
Brush-On and Wipe-On Finishes are Slow and Exacting
In mu furniture business, I brushed on varnishes for only a short time. Varnish was just too slow to brush and too slow to dry. And I needed excellent lighting to brush, sand, and rub out the varnish. I did stick with wipe-on oils for a while. Oil didn't require any special equipment, Best Non Stick Coating and I could oil in less-than-ideal conditions. I wasn't building up a thick surface film, so I worried less about dust and lint getting trapped in the film.
Any Spraying Disadvantage Can Be Overcome
As attractive as spray finishing is, it does have a few weaknesses. Setting up a safe, efficient system takes up shop space and costs money. Besides a gun, you will need a source of air, hoses, filters, and connectors. Because spraying releases finish mist into the air, you will also need a spray area that has fresh-air circulation. If you spray solvent-based finishes, you'll need to check with your local building inspector before you set up a booth. But if you spray water-based products exclusively, you won't need explosion-proof fans and fixtures.
Finally, keeping your spray gun clean is critical. Although cleaning does involve some effort and time, it doesn't take any longer to clean a spray gun than it does a brush.
Ultimately, Spraying Reduces Finishing Costs
Although some of the finish does get wasted through overspray, you can still lower your material costs. I've had to reject far fewer pieces that I've sprayed than those that were finished by brush or rag. Water Based Coatings And spraying saves labor costs. In the first month, I more than offset the initial expense of the equipment. Now my business couldn't survive without a spray system.
Published byArthur Piper
How To Prepare a Wall for the Primer Paint
Painting a wall is not as simple as taking a paintbrush, dipping it into paint, and applying paint to the surface. When you are painting a wall or any surface, it is essential to prepare the surface first. It should be clean and dry as well as sealed. The surface to be painted should be even and Ceramic Coatings smooth. This basic preparation is crucial to have the wall ready for the primer paint, the initial coating that you apply to the surface to be painted, which forms the base for better adherence of the top coats. There are three types of primer paints – alkyd, which is compatible with oil-based paints and suitable for almost all kinds of surfaces; latex and acrylic, which is economical and versatile; and tinted shellac, which works great with slick and difficult surfaces. Here are some of the things that you should do to prepare a wall for the primer paint.
Make sure that the wall to be primed is very clean and dry. If it is bare wood, use fine sandpaper to smooth and even out the surface. Sand the wood following its grain. Brush cracks with an old toothbrush and add wood filler. Sand the wood only when it is completely dry. If the wall has wood knots, fill them with wood filler and paint them with shellac first to prevent the resin from seeping through the primer and staining the top coat later. Wipe with a slightly damp cloth afterwards to remove dust. Water Based Coatings If your wall is made from resinous wood or have been previously stained, use aluminum primer to seal in the resin.
Make sure that the wall to be primed is very clean and dry. If it is bare wood, use fine sandpaper to smooth and even out the surface. Sand the wood following its grain. Brush cracks with an old toothbrush and add wood filler. Sand the wood only when it is completely dry. If the wall has wood knots, fill them with wood filler and paint them with shellac first to prevent the resin from seeping through the primer and staining the top coat later. Wipe with a slightly damp cloth afterwards to remove dust. Water Based Coatings If your wall is made from resinous wood or have been previously stained, use aluminum primer to seal in the resin.
Harmless' Fads That Caused Widespread Destruction
Fads are almost never a good thing, but rarely are they ever truly harmful. We dump a few hundred bucks into Tamagotchis, Beanie Babies, or Rubik's Cubes, and then the craze is over and we put all that crap in a shoebox to confuse our future grandchildren. However, some fads have poisoned thousands, started wars, and enslaved entire nations, all for the sake of some dumbass thing people wanted to ride, wear, or eat.
#6. France's Radium Craze Makes Paris RadioactivePhotos.com/Photos.com/Getty Images
In 1898, Marie and Pierre Curie discovered radium, which (as its name suggests) is an intensely radioactive element that will poison the nuclear titfarts out of any living thing that comes into prolonged contact with it. Radium would eventually become the basis for the development of radiotherapy as a cancer treatment, but back then, people didn't have any idea what it did. So, because it glowed in the dark and was Non Stick Coating Safety discovered at a time when science was considered to be magic, people began putting radium in every goddamn thing they could think of (Marie Curie herself kept radioactive salts by her bedside, and Pierre carried a piece of it around in his jacket like a bone-jellying pocket watch).
orau.org
Right next to his radium condoms for his other toxic bone-jelly.
And thus began a radioactive craze that hit Paris (and to a lesser extent, the rest of the world). For instance, radium became a trendy cure-all additive, because for some inexplicable reason people decided that it was an invigorating life tonic ("It HAS to do something! It glows!"). It found its way into everything from cough medicine to toothpaste, as well as topical ointments, chocolate bars, and anal suppositories intended to improve your sexual prowess (and while we cannot agree that it would improve your libido, we concede that shoving the blazing fury of an eternal atomic sun into your asshole would certainly do something to your underbelt region).
orau.org
We're guess something like Taco Bell, but in reverse.
They even sold radium water, which is exactly what it sounds like -- radioactive vitamin water peddled with the most hilariously inaccurate slogan ever: "A cure for the living dead."
But Parisians were equally enamored with radium's DayGlo properties and used it to make luminescent paint for watch faces and instrument panels. It was even used in face creams, lipstick, PTFE Coating Process and other types of makeup, because apparently having your face glow like the death angel at the end of Raiders of the Lost Ark was a look that people appreciated in the early 20th century.
thewitcontinuum.wordpress.com
"Cancer? No, I'm a Leo."
It was all good fun, really. Except that ANDRA, the organization in charge of monitoring and handling France's radioactive waste, has identified 130 areasthat still have enough trace radiation to be considered possible health risks. Most of these sites were tracked down using old advertising posters, which is the type of anthropological scavenger hunt we assumed would be left to aliens a few hundred years in the future.
Currently, ANDRA spends 4 million euros a year on decontamination, all because a few excitable Parisians got their hands on the most dangerous force in creation and smeared it all over everything like toddlers with finger paint.
#5. The Victorian Craze for Green Dye Poisons ThousandsPhotos.com
In the mid-1800s, Victorian England was hip-deep in a craze for Scheele's Green, a popular dye that stained everything the color of a Ninja Turtle's rippling bicep. Scheele's Green was used on everything -- clothing, accessories, toys, candles, curtains, and wallpaper were all considered in vogue if they Water-Based Paint carried the dark-green hue of a forest of Christmas trees. However, the primary ingredient in the dye is arsenic, which as some of you may be aware is a potent poison. People were literally coating their clothes, toys, and walls with an organ-liquefying metalloid.
Photos.com
"My ... kidneys ..."
"It's fine, just drink some radium water."
The worst part is, people knew damn well it was poisonous. The murderous properties of arsenic were well-known at that point, and its presence in Scheele's Green wasn't a secret. But for some inexplicable reason, that didn't stop anyone from using it to dye their furniture and drapery. It was even used in freaking food coloring. But the most rampant cause of accidental arsenic poisoning was the damned wallpaper -- toxic gas released by moisture compounding on the walls literally killed thousands of families, the end result of a series of decisions that quite possibly stand as the dumbest way anyone has ever died in the history of civilization.
Photos.com/Photos.com/Getty Images
"Paint the walls? Why, we'll just soak them all in poison! I literally see no downside to this."
See, the puffs of arsenic dust weren't something anyone had considered -- they all figured that, so long as nobody was licking the wallpaper, things would be fine. Unfortunately, even after the danger was revealed and many people, including Queen Victoria herself, tore out their green wallpaper, there's still plenty of it around. That's because the removal process itself is insanely dangerous.
Remember, moisture causes the wallpaper to release its deadly arsenic fartcloud, and the only way to remove wallpaper without burning down the house that contains it is to douse it with fluid and scrape it off, thereby releasing arsine gas. So now, over a hundred years later, people are still struggling with the aftereffects of the Scheele's Green fad, because every old-timey building shlocked in green wallpaper is essentially a giant gas chamber.
Jupiterimages/Photos.com/Getty Images
Although honestly, most old people's homes would smell like that regardless.
#4. The British Tea Craze Floods China With Opium, Starts a WarHulton Archive/Getty Images
Everyone knows that English people drink lots of tea. However, back in the 19th century, the majority of the British were crushing infinitely more booze, more so than at any other point in the nation's history.
Hulton Archive/Getty Images
And this was with only eight legal Churchill drinking years.
That's because gin was cheap and tea was ludicrously expensive. The tea had to be imported from China, and the Chinese ransomed every last ounce of it, refusing to trade it for anything less than silver. But when the temperance movement swept through England, the demand for tea blew uplike Timothy Dalton at Ceramic Coatings the end of The Rocketeer. Unfortunately, tea was still more expensive than a diamond-encrusted table lamp made of Pegasus bones, so how could British traders make tea more affordable to support the exploding trend? By swapping it for chests of opium, of course.
You see, opium was illegal in China, but there was still a powerful demand for it. And the British were harvesting huge quantities of pure Bengali Junk from India. So, millions of pounds of tea flooded into Britain, and in return China was awash in a sea of dazzling white lights.
Soon, just about everyone in China was addicted to opium -- almost 90 percentof all men under the age of 40 living along the coast were more or less perpetually high. The impacts were devastating, with addicts selling everything they owned to get their fix and the nation's economy grinding to a screeching halt.
opioids.com
"I could go to work today, but ... but I just don't care."
In 1839, the Chinese emperor decided to crack down on the illegal drug trade that was poisoning his country and raided several British traders, seizing thousands of chests of opium. Teflon Coating The tea craze, which by this point had spread to every man, woman, and child on the British Isles, was suddenly cut off from its most viable means of supply. In response, England sent the fucking Royal Navy.
Sixteen British warshipsspent the next two years blasting their way up the Chinese coast to Shanghai, massacring somewhere between 20,000 and 25,000 Chinese soldiers and losing only 69 men in the process (these staggering figures were due, in large part, to the fact that half of China was addicted to opium). The Chinese were forced to sign a treaty granting control of Hong Kong Island to the British and opening five ports for the continuation of the opium trade, as well as paying England for the cost of the war and the loss of income caused by the emperor's drug raids, all because English people wanted their goddamn tea.
Photos.com/Photos.com/Getty Images
Pictured: A perfectly reasonable response.
#6. France's Radium Craze Makes Paris RadioactivePhotos.com/Photos.com/Getty Images
In 1898, Marie and Pierre Curie discovered radium, which (as its name suggests) is an intensely radioactive element that will poison the nuclear titfarts out of any living thing that comes into prolonged contact with it. Radium would eventually become the basis for the development of radiotherapy as a cancer treatment, but back then, people didn't have any idea what it did. So, because it glowed in the dark and was Non Stick Coating Safety discovered at a time when science was considered to be magic, people began putting radium in every goddamn thing they could think of (Marie Curie herself kept radioactive salts by her bedside, and Pierre carried a piece of it around in his jacket like a bone-jellying pocket watch).
orau.org
Right next to his radium condoms for his other toxic bone-jelly.
And thus began a radioactive craze that hit Paris (and to a lesser extent, the rest of the world). For instance, radium became a trendy cure-all additive, because for some inexplicable reason people decided that it was an invigorating life tonic ("It HAS to do something! It glows!"). It found its way into everything from cough medicine to toothpaste, as well as topical ointments, chocolate bars, and anal suppositories intended to improve your sexual prowess (and while we cannot agree that it would improve your libido, we concede that shoving the blazing fury of an eternal atomic sun into your asshole would certainly do something to your underbelt region).
orau.org
We're guess something like Taco Bell, but in reverse.
They even sold radium water, which is exactly what it sounds like -- radioactive vitamin water peddled with the most hilariously inaccurate slogan ever: "A cure for the living dead."
But Parisians were equally enamored with radium's DayGlo properties and used it to make luminescent paint for watch faces and instrument panels. It was even used in face creams, lipstick, PTFE Coating Process and other types of makeup, because apparently having your face glow like the death angel at the end of Raiders of the Lost Ark was a look that people appreciated in the early 20th century.
thewitcontinuum.wordpress.com
"Cancer? No, I'm a Leo."
It was all good fun, really. Except that ANDRA, the organization in charge of monitoring and handling France's radioactive waste, has identified 130 areasthat still have enough trace radiation to be considered possible health risks. Most of these sites were tracked down using old advertising posters, which is the type of anthropological scavenger hunt we assumed would be left to aliens a few hundred years in the future.
Currently, ANDRA spends 4 million euros a year on decontamination, all because a few excitable Parisians got their hands on the most dangerous force in creation and smeared it all over everything like toddlers with finger paint.
#5. The Victorian Craze for Green Dye Poisons ThousandsPhotos.com
In the mid-1800s, Victorian England was hip-deep in a craze for Scheele's Green, a popular dye that stained everything the color of a Ninja Turtle's rippling bicep. Scheele's Green was used on everything -- clothing, accessories, toys, candles, curtains, and wallpaper were all considered in vogue if they Water-Based Paint carried the dark-green hue of a forest of Christmas trees. However, the primary ingredient in the dye is arsenic, which as some of you may be aware is a potent poison. People were literally coating their clothes, toys, and walls with an organ-liquefying metalloid.
Photos.com
"My ... kidneys ..."
"It's fine, just drink some radium water."
The worst part is, people knew damn well it was poisonous. The murderous properties of arsenic were well-known at that point, and its presence in Scheele's Green wasn't a secret. But for some inexplicable reason, that didn't stop anyone from using it to dye their furniture and drapery. It was even used in freaking food coloring. But the most rampant cause of accidental arsenic poisoning was the damned wallpaper -- toxic gas released by moisture compounding on the walls literally killed thousands of families, the end result of a series of decisions that quite possibly stand as the dumbest way anyone has ever died in the history of civilization.
Photos.com/Photos.com/Getty Images
"Paint the walls? Why, we'll just soak them all in poison! I literally see no downside to this."
See, the puffs of arsenic dust weren't something anyone had considered -- they all figured that, so long as nobody was licking the wallpaper, things would be fine. Unfortunately, even after the danger was revealed and many people, including Queen Victoria herself, tore out their green wallpaper, there's still plenty of it around. That's because the removal process itself is insanely dangerous.
Remember, moisture causes the wallpaper to release its deadly arsenic fartcloud, and the only way to remove wallpaper without burning down the house that contains it is to douse it with fluid and scrape it off, thereby releasing arsine gas. So now, over a hundred years later, people are still struggling with the aftereffects of the Scheele's Green fad, because every old-timey building shlocked in green wallpaper is essentially a giant gas chamber.
Jupiterimages/Photos.com/Getty Images
Although honestly, most old people's homes would smell like that regardless.
#4. The British Tea Craze Floods China With Opium, Starts a WarHulton Archive/Getty Images
Everyone knows that English people drink lots of tea. However, back in the 19th century, the majority of the British were crushing infinitely more booze, more so than at any other point in the nation's history.
Hulton Archive/Getty Images
And this was with only eight legal Churchill drinking years.
That's because gin was cheap and tea was ludicrously expensive. The tea had to be imported from China, and the Chinese ransomed every last ounce of it, refusing to trade it for anything less than silver. But when the temperance movement swept through England, the demand for tea blew uplike Timothy Dalton at Ceramic Coatings the end of The Rocketeer. Unfortunately, tea was still more expensive than a diamond-encrusted table lamp made of Pegasus bones, so how could British traders make tea more affordable to support the exploding trend? By swapping it for chests of opium, of course.
You see, opium was illegal in China, but there was still a powerful demand for it. And the British were harvesting huge quantities of pure Bengali Junk from India. So, millions of pounds of tea flooded into Britain, and in return China was awash in a sea of dazzling white lights.
Soon, just about everyone in China was addicted to opium -- almost 90 percentof all men under the age of 40 living along the coast were more or less perpetually high. The impacts were devastating, with addicts selling everything they owned to get their fix and the nation's economy grinding to a screeching halt.
opioids.com
"I could go to work today, but ... but I just don't care."
In 1839, the Chinese emperor decided to crack down on the illegal drug trade that was poisoning his country and raided several British traders, seizing thousands of chests of opium. Teflon Coating The tea craze, which by this point had spread to every man, woman, and child on the British Isles, was suddenly cut off from its most viable means of supply. In response, England sent the fucking Royal Navy.
Sixteen British warshipsspent the next two years blasting their way up the Chinese coast to Shanghai, massacring somewhere between 20,000 and 25,000 Chinese soldiers and losing only 69 men in the process (these staggering figures were due, in large part, to the fact that half of China was addicted to opium). The Chinese were forced to sign a treaty granting control of Hong Kong Island to the British and opening five ports for the continuation of the opium trade, as well as paying England for the cost of the war and the loss of income caused by the emperor's drug raids, all because English people wanted their goddamn tea.
Photos.com/Photos.com/Getty Images
Pictured: A perfectly reasonable response.
2014年1月22日星期三
Graphite Low Friction Coatings
Graphite low friction coatings are regarded some of the more widely used forms of solid film lubrication today.
Similar to molybdenum disulfide (MoS2) or tungsten disulfide (WS2) dichalcogenides, graphite also has a layered lattice, a hexagonal structure, with stronger (covalent) bonds within the structure (closely packed carbon atoms within the basal plane) than with neighboring ‘sheets’ (carbon atoms between basal planes).
But unlike the other lubricants, carbon graphite low friction coatings are not intrinsically lubricated. Graphite properties rely on adsorption of moisture or other condensable vapor such as hydrocarbons to develop the capability of lubrication. Consequently, graphite lubricates well in a normal Non Stick Coatings air atmosphere, but not at high altitudes or in vacuum. And once temperatures are high enough to create desorption, unless in the presence of relevant oxides, dry graphite will result in higher friction.
Everlube Products Pioneer and Leader in Solid Film Lubricant Technology.
There are a number of application methods, including a simple rubbing or burnishing, impact or impingement (powdered graphite), or air-sprayed resin-bonded or inorganically bonded coatings. Coating thickness of graphite low friction coatings can vary from less than 0.0001 inch in pure form, and up to 0.0005 inch or so, as resin-bonded or ceramic-bonded lubricants.
Friction coefficient less than 0.05 is attainable, but will also vary with humidity and sliding conditions. Tests show friction lowers with load (up to approximately 50,000 psi), faster surface PTFE Coatings speed, or both. Similar to MoS2 or WS2, friction from graphite low friction coatings is independent of particle size, though the larger particles can carry more load.
Though oxidation products (carbon dioxide, CO2) begin to form above 900 degrees Fahrenheit, lubrication from graphite low friction coatings is feasible at service temperatures of 1200 degrees Fahrenheit.
As with the other dry film lubricants, while differences may prove negligible, you will have to determine which is better for you: longer wear life or better performance. Generally, friction from graphite low friction coatings will be slightly higher by coating both surfaces, rather than coating one surface only. But wear life will increase coating both surfaces.
Without friction, life would certainly be inconvenient, if not dangerous. For example, we would not be able to easily stop and start our motion, or change our direction. But when it comes to moving machinery, in the presence of friction, there is considerable inefficiency associated with energy loss, diminished performance, and certainly limitations on wear resistance.
Working systems abound in the absence of lubrication. With poor chosen combination, like hard/soft metals, or poor quality surfaces, static (stationary) friction can be exceptionally Water Based Coating higher than dynamic (moving) friction. Oftentimes, the result is galling or seizure, the act of a ‘cold weld’. Best case, there is a ‘stick-slip’ phenomenon, the result of surfaces temporarily adjoined, bound sometimes by the smallest of areas, the most intimate of contact. Until the threshold of elastic energy is overcome between the two surfaces, forward movement can not occur.
Consequently, for dry lubrication to work successfully, these bonds (referred to as the adhesive component of friction) must be broken. This is where the dry film lubricants like graphite low friction coatings can serve you well.
订阅:
博文 (Atom)